This is version 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 . It is not the current version, and thus it cannot be edited.

Back to current version Restore this version

Expressions allows to use mathematical formulas to be used in d3web knowledge bases. In every formula you may access existing questions and their values, as well as predefined constants. The results of those formulas may be used to assign it to an existing question or as a precondition in a rule.

This tutorial is built in three chapters:

1. The supported markups and how expression can be used there.
2. The expression syntax with detailed information on the expression's capabilities.
3. A function reference table with a list of all available functions and their documentation.

Supported Markups#

The expressions are integrated in a bunch of existing markups, as well as defining some additional markups.

Rules#

Expression can be used in %%Rule markup in both conditions and actions. In both, it must be surrounded by eval(...) containing the expression. When using the expression as a condition, the expression must result to a boolean value, otherwise an error is signaled and the rule will not be created. The rule will fire if the condition evaluates to "true". In the following example the rule will fire of the gradient of question "measurement" is above 1 during the last 10 seconds.

%%Rule 
IF eval( gradient( measurement[-10s,0s] ) > 1 )
THEN ...
/%

For rule actions the expression can be used to assign the resulting value to an abstract question. The expression is also surrounded by eval(...), preceded by the question to be assigned. Please note that the questions type must be compatible to the result of the expression, otherwise an error is signaled and the rule will not be created. In the following example the question myGradient will be assigned to the gradient, the question "measurement" had during the last 10 seconds:

%%Rule 
IF measurement = known
THEN myGradient = eval( gradient( measurement[-10s,0s] ) )
/%

Direct question assignment#

Using the markup %%Variable you can directly assign the result of an expression to an existing question. Please note that the questions type must be compatible to the result of the expression, otherwise an error is signaled and the assignment will not be created. Unlike using the expressions in rules, no eval(...) is required. The assignment is always kept up-to-date, so the value of the assigned question is never outdated.

%%Variable myGradient = gradient( measurement[-10s,0s] )

Defining Constants#

Constants are helpful to define values that have a special meaning and therefore naming it. Those constants can be of any type (e.g. number, date, boolean) and can be used in any expression instead the direct value. This gives you the possibility to also alter the constant's value in the wiki without altering all the usages of the value.

Defining a constant is identical to defining a direct question assignment, but instead of a predefined question the constant name is to be written left to the expression. The type of the constant is automatically derived by the result of the expression. Note that defining a constant, neither questions nor other constants are allowed to be used in the defining expression. See some examples:

// define a numeric constant
%%Constant pi = 3.14159265358979323846

// define a date constant (see special date notation)
%%Constant bostonTeaParty = #1773-12-16#

// you may also use operators and functions
%%Constant silvesterParty = #1999-12-31# + 19h + 30min
%%Constant pi_of_Archimedes = 3 + 9552/67441

// use other constants is NOT ALLOWED!!! --> error signaled
%%Constant invalidDeclaration = 2*pi

Flowcharts#

Expressions can also be used in the flowchart graphical editor. Similar to rules the expressions can be used as both assignments in nodes and conditions on arrows.

Using expressions for assignment

Using expressions as conditions

Expression syntax#

Basic calculations#

You can write expression in a natural operator infix-notation. For mathematical calculations you can use the common operators "+", "-", "*", "/" to addition, subtraction, multiplication and division. In addition the infix operator "^" for power is also defined. The operators have their priority as usual in algebra (1: "^"; 2: "*", "/"; 3: "+", "-"). Brackets can be used to change priority of evaluation.

// examples of valid expressions
1 + 3        // result is 4
2 ^ 16 - 1   // result is 65635
2 ^ (16 - 1) // result is 32768

Types and literals#

Each element in an expression has a defined result type. The following types are defined: numbers, booleans, durations, time-points and strings. In the examples above, only numbers are used. By typing a number in an expression you have defined a literal constant. But also the other types have their literal constants to be used in expressions:

For each type there is also a history of that type available. A history is the evolution of a single value over a certain range in time. A history consists of a sequence of past values. Each value is associated with a time-point when the value has been set. For a history, each value is assumed to be valid from its time-point until the next value of the history has been set.

Boolean expressions#

For comparing values the operators "=" (or "==", which is identical), "<", "<=", ">", ">=" and "!=" are defined. The result of these compare operators are a boolean value, "true" or "false" to be more precise. For booleans there are also some additional infix operators defined: "&" for "logical and" and "|" for "logical or", as well as "&&" and "||" which are identical to "&" and "|". You can also use "!" for logical negation.

// example comparators
1 >= 3          // true
2^16-1 == 65535 // true

// example boolean operators
true & false    // false
true | false    // true
true & !false   // true

Using functions#

There are a lot of functions provided, that can be applied to a set of arguments. See function reference table for a complete set of all available functions. Each function has a number of signatures describing the arguments allowed to be used for the function.

A function is called by writing the function name followed by brackets. Inside the brackets the arguments of the function can be listed, separated by ",". Examples of functions are:

floor( 3.23 )          // results to 3
average( 1, 2, 3, 4 )  // results to 2.5

Each of the infix operators available have also a corresponding function. By looking in the function reference table you can see to what argument types the operators can be applied to.

Access question and solution values#

You can access the current value of a question by simply writing the question's or solution's name in a formula. If the name contains any non-alphanumeric characters, you can use double quotes on the name. Referring to a question or solution, the current (most recent) value is used when the expression is evaluated.

// access question values
floor(myQuestion + 1)             // using the current value of myQuestion
floor("My special question" + 1)  // using the current value of the question "My special question"

Using questions or solutions, you can also use the special []-operator, that allows you to access a past value of the object or it's whole history. Please note that this is only allowed for questions and solutions that are recorded in the time database. This is the default behaviour, but may be altered setting the object's property "history" to "false". The []-operator has different possible usages:

• <object-name>[]:
  Returns the whole history of the object with the name <object-name>. It contains every known value of the object since the session has been started.
• <object-name>[<time-point>]:
  Returns the value of the object with the name <object-name> that has been valid for the specified <time-point>. If the object has not been set to that time-point, the most recent value before that time will be used. If the object had not been set at all till the specified time, "undefined" is returned.
• <object-name>[<time-point>, <time-point>]:
  Returns the sub-history of the object with the name <object-name> starting from the earlier of the two time-points and lasting to the latter one. The sub-history contains all values of the object's full history that have been valid during the specified interval. This lead to that the sub-history usually starts before the specified time-points and have their latest value before the latter of those specified time-points.
• <object-name>![<time-point>, <time-point>]:
  Returns the strict sub-history of the object with the name <object-name> starting from the earlier of the two time-points and lasting to the latter one. The sub-history contains all values of the object's full history that have been set during the specified interval. In contrast to 'normal' sub-history, this strict sub-history will not maybe start before the specified start-point, but only at the start-point or later (and before the end-point).

// access question values
myQuestion[now - 10min]  // using the value of myQuestion 10 minutes ago

// access question histories
average(myQuestion[])                // average of all values myQuestion had before (incl. current one)
average(myQuestion[now-10min, now])  // average of the last 10 minutes

Instead of using time-points, the operator also allows to use durations (e.g. "10min"). Using a duration means that you refer to the time the specified duration ago. Regardless to whether the duration is positive or negative, the operator always goes into the past starting at the "recent time". This "recent time" is the latest time the object has been set, but not from the global variable 'now'. Especially for rarely set objects this can make a big difference.

// using durations instead of time-points
myQuestion[10min]                  // using the value of myQuestion 10 minutes before its latest value
average(myQuestion[-10min, 0min])  // average of the last 10 minutes since the latest value
average(myQuestion[10min, 0min])   // identical to the line above

Using questions in formulas, the questions will be interpreted as following:

• [num]: Number
• [yn]: Boolean
• [oc]: Number (Its value is a natural/integer number, starting at 1 for the first choice, 2 for the second one and so on.)
• [mc]: -- (These questions are not allowed to be used in expressions, since no appropriate interpretation can be defined.)
• [date]: Time-Point
• [text]: String

Using solutions in formulas the solution's value is a numeric integer value as following:

• EXCLUDED: 0
• UNCLEAR: 1
• SUGGESTED: 2
• ESTABLISHED: 3

Access question choices#

You can also access the choices of the questions as constant symbols. The choices have their value defined by "1" for the first choice of a question, "2" for the second one, and so on. Since the name of choices are not unique, but identical named choices may have different values for different question, it is necessary to link the choice to the correct question.

Usually in expression you can simply write the choice, after you have used the question before. To have this simple rule, there is complex identification behind, you usually not get noticed of. Here it is how the choices are matched to their choice-questions (both, [oc] and [yn]):

1. If you use a choice-question in a function call, its choices are known in every following argument of that function. Thus in "equal(myQuestion, ...)", the choices of myQuestion are known at the second argument.
2. If multiple questions are used all choices of all questions are known to the following arguments. Thus in "average(myQuestion1, myQuestion2, ...)" the third argument can refer to choices of both questions.
3. Choices does not overwrite other literal symbols. Choices of questions will not be overwritten by the following question's choices.
4. If a question is used in a sub-expression, being a functions argument, the choices of the question are also known at the following arguments of the function, if the sub-expression's result "still refers to the choice-question". This is a complex thing, so see the example "equal(max(myQuestion), myChoice)". Here the function max still refers the to values of myQuestion, thus myChoice can be used to refer to a choice of myQuestion. In contrast, "equal(gradient(myQuestion), myChoice)" will fail, because the gradient has a complete different meaning.
5. Infix-operators are treated exactly as their functional notation. Thus "question = foo" is identical to "equal(question, foo)".

As mentioned you usually not in charge to be aware of this rule. Simply use choices natural to after their questions:

myQuestion[-10s] = myChoice
myQuestion = myChoice && myOtherQuestion = myOtherChoice
average( myQuestion[] ) > myChoice

You can also directly refer to any choice of any question, under ignorance of all the rules above. To do that simply use the question name, append "#" and the choice name. If the question or choice contains any special characters or white-spaces use double quotes around the whole literal:

// direct access to choices
myQuestion#myChoice
"My special question#my special choice"

Access solution states#

You can also access the states of a solution as constant symbols, similar to question choices. The states have their value defined by "0" if the solution is excluded, "1" for neutral, "2" for suggested and "3" for established solutions. Usually the rating states for a certain solution can be accessed by their name (e.g. "ESTABLISHED"). The behavior is identical to choice questions, thus refer to the section above for more details.

mySolution[-10s] = ESTABLISHED
median( mySolution[] ) >= SUGGESTED

Special keywords#

There is also a number of special literal tokens defined when using expression. Those tokens are:

• start: time-point representing the start of the d3web-session. It will be initialized once and never be changed during the session. Please note that the start time is not tied to the system's clock, it might differ from that.
• now: time-point representing the most recent time of the d3web-session. It will update frequently, every time any value is set at a newer time or if the time database is explicitly told to proceed in time. Please note that the now time is not tied to the system's clock, it might differ from that.
• true, false: boolean literals for the true and false value
• pi: the value of pi, defined as 3.141592653589793
• e: the value of e, defined as 2.718281828459045

Undefined values#

When using questions in expressions, their values may be undefined, e.g. no value has been set to the question. In addition also functions may return undefined, e.g. calculating the average of an empty history. Most functions will return undefined if any of it's arguments is undefined. Otherwise, function's behavior on undefined values is denoted by the individual functions.

Function Reference#